Attwood 1733-4 Blower Bilge 3″ Water Resistant , White

Attwood 1733-4 Blower Bilge 3" Water Resistant , White

    Features:

  • Provides outstanding ventilation airflow for areas such as engine compartments, galleys, bilges, and heads
  • Features a patented, in-line design and the 5-blade fan maximizes airflow and efficiency
  • The blade sweep and pitch are engineered for a high lift coefficient, resulting in increased airflow speed for optimized ventilation
  • System airflow exceeds older-style in-line blowers by as much as 25 percent
  • Up to four times more efficient than competitive blowers as it draws up to 40 percent fewer amps
  • Marine ignition protected and has built-in mounting feet for easy vertical or horizontal installation
  • Do not operate in area of high heat over 160º F (71º C)

Attwood 1749-4 Turbo 4000 Series II In-Line Blower, For 4-Inch Interior Diameter Vent Hose, Water Resistant, 12-Volt

Attwood 1749-4 Turbo 4000 Series II In-Line Blower, For 4-Inch Interior Diameter Vent Hose, Water Resistant, 12-Volt

    Features:

  • 3-year Warranty
  • Vertical or horizontal install
  • Water-resistant, 12-volt, white
  • Five-blade fan maximize airflow and efficiency
  • Low amp draw Motor for longer blower and battery life
  • For 7/8″ I.D. thru-hull
  • Ideal for livewell drains
  • Brass snaps and plates
  • Note: Not for use with chemicals or fuels

Attwood 1731-4 Turbo 3000 Series In-Line Bilge Blower, For 3-Inch Interior Diameter Vent Hose, 12-Volt

Attwood 1731-4 Turbo 3000 Series In-Line Bilge Blower, For 3-Inch Interior Diameter Vent Hose, 12-Volt

    Features:

  • Provides outstanding ventilation airflow for areas such as engine compartments, galleys, bilges, and heads
  • Features a patented, in-line design and the 5-blade fan maximizes airflow and efficiency
  • The blade sweep and pitch are engineered for a high lift coefficient, resulting in increased airflow speed for optimized ventilation
  • System airflow exceeds older-style in-line blowers by as much as 25 percent
  • Up to four times more efficient than competitive blowers as it draws up to 40 percent fewer amps
  • Marine ignition protected and has built-in mounting feet for easy vertical or horizontal installation
  • Do not operate in area of high heat over 160º F (71º C)

Attwood Blower (White, 4-Inch)

Attwood Blower (White, 4-Inch)

    Features:

  • Patented in-line design provides ventilation for engine compartments, galleys, bilges and heads
  • Individual carton includes 2 tie straps
  • All are CE certified
  • 16-gauge tinned and caulked copper wire leads with optional MP1 molded rubber connectors
  • Mounting feet allow vertical or horizontal installation in confined spaces

attwood Turbo 3000 in-Line Blowers, White 3 inch (1733-1) (Pair) FO-2835-M2

attwood Turbo 3000 in-Line Blowers, White 3 inch (1733-1) (Pair) FO-2835-M2

    Features:

  • ATTWOOD MODEL Turbo 3000 (1733-1). DIAMETER is 3 INCH and VOLTAGE IS 12 Volts
  • THIS BLOWERS IS CORROSION RESISTANT Nickel-plated motor. BUILT with Five-blade fan to maximize airflow and efficiency
  • IT IS WATER RESISTANT and LOW AMP draw motor for longer blower and battery life
  • MOUNTING FEET allow easy vertical or horizontal install
  • # 10 FASTENERS (not included) are required. FIVE OCEANS, 40 YEARS developing High-Quality Marine & Outdoor Products

Attwood Blower H20 Resist (White, 4-Inch)

Attwood Blower H20 Resist (White, 4-Inch)

    Features:

  • Patented in-line design provides ventilation for engine compartments, galleys, bilges, and heads
  • Install with no.10 fasteners, individual carton includes 2 tie straps
  • All are CE certified
  • 16-gauge tinned and caulked copper wire leads with optional MP1 molded rubber connectors
  • Mounting feet allow vertical or horizontal installation in confined spaces

Attwood Turbo 4000 Series II In-Line Blower – 12V – White

Attwood Turbo 4000 Series II In-Line Blower - 12V - White

    Features:

  • Includes Attwood Turbo 4000 Series II In-Line Blower – 12V – White
  • Ducting = 4 | Open Flow (CFM) = 200 CFM | Volts = 12V

attwood Turbo 4000 in-Line Blowers, White 4″(1749-1) FO-2836

attwood Turbo 4000 in-Line Blowers, White 4"(1749-1) FO-2836

    Features:

  • ATTWOOD MODEL Turbo 4000 (1749-1). DIAMETER is 4 INCH and VOLTAGE is 12 Volts
  • THIS BLOWERS IS CORROSION RESISTANT Nickel-plated motor. BUILT with Five-blade fan to maximize airflow and efficiency
  • IT IS WATER RESISTANT and LOW AMP draw motor for longer blower and battery life
  • MOUNTING FEET allow easy vertical or horizontal install
  • Stiffening ribs to reduce housing distortion. FIVE OCEANS, 40 YEARS developing High-Quality Marine & Outdoor Products

AMRA-1749-4 Attwood Water-Resistant Turbo In-Line Bilge Blower – 4″

AMRA-1749-4 Attwood Water-Resistant Turbo In-Line Bilge Blower - 4"

    Features:

  • The first vane axial-flow fan bilge blowers designed using aerospace technology to maximize performance. No other bilge blowers in the industry provide such powerful system output at such a low power input in a compact size.
  • Patented in-line design – provides ventilation for engine compartments, galleys, bilges, and heads. Mounting feet allow vertical or horizontal installation in confined spaces. Install with #10 fasteners. Individual carton includes 2 tie straps. All are CE certified. 16-gauge tinned and caulked copper wire leads with optional MP1 molded rubber connectors. Improved 3″ design includes:
  • Nickel-plated motor can for corrosion resistance. Stiffening ribs to reduce housing distortion
  • Motor cap to seal wires and motor for water resistance. Five-blade fan maximize airflow and efficiency. Tabs in intake and exhaust hold ventilation hose/ clamp firmly in place
  • Low amp draw motor for longer blower and battery life. Built-in mounting feet allow easy vertical or horizontal install. 3 Year Warranty

As an Amazon Associate I earn from qualifying purchases.

Random products:

izlid
izlah