Metabo HPT 10-Inch Miter Saw | Single Bevel | Compound | 15-Amp Motor | C10FCGS

Metabo HPT 10-Inch Miter Saw | Single Bevel | Compound | 15-Amp Motor | C10FCGS

    Features:

  • MOTOR: 15 Amp motor delivers high power for the toughest of cuts generating a no-load speed of up to 5,000 RPM
  • LIGHTWEIGHT: Only 24.2 lbs. to facilitate maneuverability and portability
  • MITER ANGLE RANGE: 0-52 degrees, to the right and left for increased flexibility
  • BEVEL RANGE: 0-45 degrees, to the left with adjustable bevel stops for precision cuts
  • LARGE TABLE: Offers better material support with vice clamping system to secure work piece
  • THUMB ACTUATED POSITIVE STOPS: For quick miter adjustments
  • HORIZONTAL HANDLE: For a secure hold
  • WARRANTY: Covered by Metabo HPT’s Professional 5-Year Tool Warranty

BOSCH CM8S 8-1/2 Inch Single Bevel Sliding Compound Miter Saw, Blue

BOSCH CM8S 8-1/2 Inch Single Bevel Sliding Compound Miter Saw, Blue

    Features:

  • CONVENIENT: The Bosch CM8S features a bevel lock lever and bevel turret stops located on the side of tool for quick and easy adjustments without reaching behind the saw. The saw also features easy-to-read miter and bevel scales.
  • SUPPORTIVE: The miter saw provides an integrated expanding base extensions that expands up to 29-Inches left to right for additional work-piece support. Bevel Angle Range: -2° to 47°
  • CONVENIENT: Features a miter detent override, an intuitive, easy to access thumb-actuated override as well as a clear lower guard for an unobstructed view of the saw in action. The detent system provides quick and accurate cuts.
  • PORTABLE: The Bosch CM8S miter saw CM8S has the same crosscut capacity of 12-1 4 in. as a 10 inch miter saw but is 30% lighter. The Bosch exclusive design provides ultimate portability with a top carry handle and a weight of just 37 pounds
  • PORTABLE: The Bosch CM8S miter saw CM8S has the same crosscut capacity of 12-1 4 in. as a 10 inch miter saw but is 30% lighter. The Bosch exclusive design provides ultimate portability with a top carry handle and a weight of just 37 pounds

DEWALT 12-Inch Miter Saw, 15-Amp, Single Bevel, Compound (DWS715)

DEWALT 12-Inch Miter Saw, 15-Amp, Single Bevel, Compound (DWS715)

    Features:

  • Stainless-steel miter detent plate of 12-inch miter saw blade comes with 14 positive stops
  • The mitre saw features the precise miter system and machined base fence support
  • Tall sliding fence of DEWALT miter saw supports 5-1/2-inch base vertically
  • Bevels 0 degree – 48degree to the left and 0 degree- 3degree to the right. Tool height-15 inch
  • 2-inch x 8-inch dimensional lumber cross cut capacity at 90 degree and 2-inch x 6-inch dimensional lumber at 45 degree

CRAFTSMAN V20 7-1/4-Inch Sliding Miter Saw Kit, Cordless (CMCS714M1)

CRAFTSMAN V20 7-1/4-Inch Sliding Miter Saw Kit, Cordless (CMCS714M1)

    Features:

  • POWERFUL MOTOR: 3,800 RPM motor of CRAFTSMAN miter saw is made for cutting 2X dimensional lumber, hardwoods, baseboard and trim with ease
  • SLIDE CAPABILITIES: The mitre saw has 8-inch cross cut at 90-degree and 5-1/2-inch cross cut at 45 degree
  • ADDED CAPACITY: The sliding miter saw cuts 3-5/8-inch nested crowns and 3-1/2-inch baseboards vertically
  • ACCURACY AND VISIBILITY: LED cut line positioning system
  • QUICK AND ACCRUATE: 9 casted miter detent stops for adjustments
  • SINGLE CHARGE: Makes up to 585 cuts in 3-1/4-inch MDF baseboard** on a single charge
  • PORTABILITY: Lightweight design with side carry handles

DEWALT Miter Saw, Single Bevel, Compound, 10-Inch, 15-Amp (DWS713)

DEWALT Miter Saw, Single Bevel, Compound, 10-Inch, 15-Amp (DWS713)

    Features:

  • Stainless-steel miter detent plate of the 10-inch miter saw blade comes with 14 positive stops
  • The mitre saw has a precise miter system and machined base fence support
  • Tall sliding fence of DEWALT miter saw supports 4-1/4-inch base vertically
  • Bevels 0 degree – 48degree to the left and 0 degree- 3degree to the right
  • 2-inch x 6-inch dimensional lumber cross cut capacity at 90 degree and 2-inch x 4-inch dimensional lumber at 45 degree

DEWALT 20V MAX 7-1/4-Inch Miter Saw, Tool Only, Cordless (DCS361B)

DEWALT 20V MAX 7-1/4-Inch Miter Saw, Tool Only, Cordless (DCS361B)

    Features:

  • Integrated cut line cross-cut positioning system provides adjustment-free cut line indication for better accuracy and visibility
  • Capacity to cup 3 5/8 in. nested crown and 3 1/2 in. base vertically
  • Adjustable stainless steel miter detent plate with 11 positive stops improves productivity and ensures cutting accuracy
  • Oversized bevel scale makes bevel angle adjustments accurate and easy
  • Compact, lightweight design (30 lbs.) allows for easy transport and storage
  • Cam lock miter handle delivers quick and accurate miter angles

Skil 10″ Dual Bevel Sliding Compound Miter Saw – MS6305-00

Skil 10" Dual Bevel Sliding Compound Miter Saw - MS6305-00

    Features:

  • POWERFUL 15 AMP MOTOR – Delivers 4,800 RPM for quick, detailed cuts
  • DUAL BEVEL – Perform cuts in four positive stop positions at 48° & 45° left, 0°, and 45° right
  • LED SHADOW LINE – Provides high precision cuts with greater accuracy than lasers
  • 2×12 CUTTING CAPACITY – Cross cuts lumber up to 2×12 at 90 degrees, and 2×8 lumber at 45 degrees
  • CUTS AT COMMON ANGLES – Cuts up to 50 degrees left and right with 11 positive stops at most used angles

EANOSIC Setup Blocks Height Gauge Set, 8pcs Precision Aluminum Setup Bars for Router and Table Saw Accessories Woodworking Set Up, Bars Include Laser Engraved Size Markings (Extra Long 4 Inch)

EANOSIC Setup Blocks Height Gauge Set, 8pcs Precision Aluminum Setup Bars for Router and Table Saw Accessories Woodworking Set Up, Bars Include Laser Engraved Size Markings (Extra Long 4 Inch)

    Features:

  • The setup blocks can easily set the height of the fence, blades bits and other cutters according to the needs, which is faster and more accurate than using a combined ruler.
  • Combine bars to setup 100’s of measurements. Stack setup bars for a wide variation or sizes, or use on their own, work and measure quickly.
  • Set up gauge blocks are all 4 inches extra long. Accurate gauge block set sizes: 1/16”, 3/32”, 1/8”, 3/16”, 1/4”, 1/2”, 3/4”, 1×8/7×4″
  • Easy-to-read laser etched labels on each block. Fitted case included, so the combination square will be more tightly protected during transportation.
  • 8 pcs Blocks Solid Aluminum Construction Black Anodized to better protect router bits and saws.

Hitachi C10FCH2 15-Amp 10-inch Single Bevel Compound Miter Saw with Laser Marker

Hitachi C10FCH2 15-Amp 10-inch Single Bevel Compound Miter Saw with Laser Marker

    Features:

  • Hitachi Power Tools has renamed to Metabo HPT. Same great tools, with only a new name.
  • Hitachi’s Laser Marker System for increased cutting accuracy
  • 15 Amp motor, powerful for the toughest cutting jobs
  • 0 52 Degree miter angle range, to the right and left for increased flexibility
  • 0 45 Degree bevel angle range, to the left with adjustable bevel stops for precision cuts
  • Horizontal handle with soft, vibration reducing Elastomer grip adds comfort and control. Powerful 1950W maximum output and 1520W power input motor
  • Large pivoting flip fence, raises 4 inches for cutting crown molding vertically
  • Thumb actuated positive stops, easy to use for quick miter adjustments
  • Dust collector attachment, to minimize airborne particles
  • Only 26.5 pounds to facilitate maneuverability and portability

ENGiNDOT Sliding Miter Saw, 10-Inch Single Bevel Compound Miter Saw with 15-Amp Motor, Double Speed (4500 & 3200 RPM), Laser Guide, 3 Blades, Bevel Cut (0°- 45°) for Wood, PVC or Soft Metal Cutting

ENGiNDOT Sliding Miter Saw, 10-Inch Single Bevel Compound Miter Saw with 15-Amp Motor, Double Speed (4500 & 3200 RPM), Laser Guide, 3 Blades, Bevel Cut (0°- 45°) for Wood, PVC or Soft Metal Cutting

    Features:

  • 3 Blades & Powerful Motor: The ENGiNDOT sliding miter saw comes with 3 blades, two 10″ 40T TCT blades for wood and plastic, and one multi-functional 10″ 48T TCT blade for versatile use. Richer accessories provide a wide range of choice for your operation. Powerful 15-amp, 2000 Watt motor gives more power and durability.
  • 2 Adjustable Speed & Grand Cutting Capacity: By pressing the switch, you can convert between the two speeds (3200 RPM or 4500 RPM) effortlessly for more precise cutting, high speed for wood while low speed for metal and plastic, giving your cutting more choices. The max cutting capacity up to 3.54 x 13.19 inches at 90 degree and 1.77 x 13.19 inches at 45 degree, offers more possibilities for your work.
  • Bevel Cutting & Iron Blade Guard: The free bevel range from 0° to 45° allows you to do bevel cutting for more purposes. The angle of the miter table is -45°/ 0°/ + 45° and the positive angles in all these directions are 0°, 15°, 22.5°, 30° and 45° respectively. Solid iron self-retracting saw shield is more durable than other plastic and transparent saw shield, the teeth cover of the cutting blade can protect you from accidental mishaps.
  • Laser Guide: This 10-Inch single bevel compound miter saw equipped with laser guide, it can attached to accurately track real-time position and allows you to perform precise cutting.
  • What You Get: 1* ENGiNDOT sliding miter saw, 1* 10″ multi-function blade, 2* 10″ blades for wood, 1* M3 allen wrench, 1* dual-head wrench, 2* side support (packed on the machine), 1* clamping device (packed on the machine), 1* user manual, 1* dust bag.

As an Amazon Associate I earn from qualifying purchases.

Random products:

gretsch acoustic guitars
laser airprint printers