Kenwood KFC-W3041 12″ 4 Ohm 2000W Car Subwoofer (Single) with Gravity Magnet Phone Holder Bundle

Kenwood KFC-W3041 12" 4 Ohm 2000W Car Subwoofer (Single) with Gravity Magnet Phone Holder Bundle

    Features:

  • Kenwood KFC-W3041 (Single) + Gravity Magnet Phone Holder Bundle
  • Subwoofer Type: 12 inch PP Cone
  • Peak Power: 2000 W (300 W RMS)
  • Frequency Response: 29Hz-300Hz
  • Impedance: 4 ohms / Mounting Depth: 5-3/8 inch

Kenwood Excelon KFC-XW1241 12″ 4-ohm Component Subwoofer | Peak Power 2000W

Kenwood Excelon KFC-XW1241 12" 4-ohm Component Subwoofer | Peak Power 2000W

    Features:

  • X-Motif Cone controls resonance frequency and cuts unnecessary frequency, delivering powerful and solid bass response.
  • The KFC-XW1241 has a robust thermal management system implemented with an Aluminum Bobbin, Closed Yoke Design, and Advanced Airflow Control.
  • Computer-optimized damper controls stress and increases mechanical durability.
  • The spring post terminals will accept pin connectors, single banana plugs, or bare wire up to 10-gauge.
  • Power handling: 300 watts RMS (2000 watts peak)

Kenwood Excelon KFC-XW1241HP 12″ 4-ohm Component Subwoofer | Peak Power 2000W

Kenwood Excelon KFC-XW1241HP 12" 4-ohm Component Subwoofer | Peak Power 2000W

    Features:

  • 12” High Power Class Subwoofer
  • Polypropylene Cone with Dual Area Cap
  • Stress-Controlled Spider
  • 500W RMS, 2000W Peak Power
  • Freq. Response 26Hz-300Hz 4Ω Impedance Mounting Depth 5-11/16”

Kenwood P-XW1221SHP 12″ High Performance 500-Watt 2-Ohm Subwoofer Enclosure

Kenwood P-XW1221SHP 12" High Performance 500-Watt 2-Ohm Subwoofer Enclosure

    Features:

  • The Kenwood Excelon P-XW1221S ported subwoofer enclosure features a single heavy-duty 2Ω, 12″ driver that can handle 500W RMS with peak power up to 2000W.
  • The injection-molded Polypropylene cone features a dual area cap that provides the rigidity needed for high-power handing while delivering accurate bass.
  • Extra thick legs support the weight of the system when installed in a down-firing application. This ensures the low frequency energy is transmitted without loss, resulting in powerful, impactful bass.
  • The P-XW1221S is constructed of 5/8″ thick MDF (Medium Density Fiberboard) with a 3/4″ thick baffle, providing outstanding strength and durability for maintaining tight accurate bass at high volumes.
  • The P-XW1221S includes a single pair of nickel-plated spring-post connectors that can accept speaker wire up to 8AWG.

Pair of Kenwood KFC-W3041 12″ 4 Ohm 2000W Car Subwoofer (2 Pieces) with Gravity Magnet Phone Holder Bundle

Pair of Kenwood KFC-W3041 12" 4 Ohm 2000W Car Subwoofer (2 Pieces) with Gravity Magnet Phone Holder Bundle

    Features:

  • Kenwood KFC-W3041 (Pair) + Gravity Magnet Phone Holder Bundle
  • Subwoofer Type: 12 inch PP Cone
  • Peak Power: 2000 W (300 W RMS)
  • Frequency Response: 29Hz-300Hz
  • Impedance: 4 ohms / Mounting Depth: 5-3/8 inch

Kenwood P-XW1221D Dual 12″ Preloaded 2-Ohm Subwoofer Enclosure

Kenwood P-XW1221D Dual 12" Preloaded 2-Ohm Subwoofer Enclosure

    Features:

  • ported enclosure with two 12″ subwoofers // wired for 2 ohms total impedance
  • polypropylene cone with diamond array pattern // stress controlled spider
  • 5/8″ MDF construction with 3/4″ MDF baffle // power handling: 600 watts RMS (2000 watts peak)
  • total impedance: 2 ohms // frequency response: 29-300 Hz
  • spring-post terminals accommodate up to 8-gauge wire // can be installed as front-, rear-, or down-firing, grilles included

Kenwood P-XW1221DHP Dual 12″ High Performance 2-Ohm Subwoofer Enclosure

Kenwood P-XW1221DHP Dual 12" High Performance 2-Ohm Subwoofer Enclosure

    Features:

  • The Kenwood Excelon P-XW1221DHP ported subwoofer enclosure features 2 heavy-duty 12″ drivers, internally wired for a 2Ω output, that can handle 1000W RMS with peak power up to 2000W.
  • The injection-molded Polypropylene cones feature a dual area cap that provides the rigidity needed for high-power handing while delivering accurate bass.
  • Extra thick legs support the weight of the system when installed in a down-firing application. This ensures the low frequency energy is transmitted without loss, resulting in powerful, impactful bass.
  • The P-XW1221DHP is constructed of 5/8″ thick MDF (Medium Density Fiberboard) with a 3/4″ thick baffle, providing outstanding strength and durability for maintaining tight accurate bass at high volumes.
  • The P-XW1221DHP includes a single pair of nickel-plated spring-post connectors that can accept speaker wire up to 8AWG. The total output impedance at the connectors is 2Ω.

Kenwood KFC-W12PS 12″ Single 4 Ohm Subwoofer | Diamond Array Pattern Polypropylene Cone

Kenwood KFC-W12PS 12" Single 4 Ohm Subwoofer | Diamond Array Pattern Polypropylene Cone

    Features:

  • The pole piece has been extended to provide a more linear magnetic field for woofer operation. This lowers distortion and provides the woofer with better low frequency response.
  • The stacked magnet assembly is used to create a powerful linear motor with increased excursion capability for superior bass output.
  • The spring post terminals on one side of the woofer connect to your amplifier’s wiring. The posts will accept pin connectors, single banana plugs, or bare wire up to 10 gauge.
  • Textured polypropylene cone with urethane surround
  • Kenwood’s “Diamond Array” pattern strengthens the polypropylene cone, helping it to maintain its shape when you’re pushing the bass hard.

Kenwood Excelon KFC-XW1221HP 12″ 2-ohm Component Subwoofer | Peak Power 2000W

Kenwood Excelon KFC-XW1221HP 12" 2-ohm Component Subwoofer | Peak Power 2000W

    Features:

  • 12” High Power Class Subwoofer
  • Polypropylene Cone with Dual Area Cap Stress-Controlled Spider
  • 500W RMS, 2000W Peak Power
  • Freq. Response 26Hz-300Hz
  • 2Ω Impedance Mounting Depth 5-11/16”

As an Amazon Associate I earn from qualifying purchases.

Random products:

duracell auto battery
reacher grabbers