Forney 20857 Tap Magic Industrial Pro Cutting Fluid, 4 oz
- Non-Spray cutting fluid
- Use for tapping, threading, drilling and reaming
- Use on ferrous metals and non-ferrous alloys
- Apply directly on the work surface
- Click on the (BY FORNEY) name above in blue under the title to view our full catalog of Welders, Abrasives, Chain/Wire Rope, Tools and more!
Milescraft 1318 Drillmate Drill Guide with chuck
- Perfect for straight or angled drilling, drilling on the edge of a board or on round stock
- Attaches to all 3/8″ And 1/2″ Power drills and it also includes a 3/8″ Capacity chuck with key
- Angle cuts of 45 Degree to 90 degrees, with a built in angle read out in the all metal base
- Centering channels built into the bottom of the base, to accommodate drilling any round stock up to 3 inches in diameter
- Adjustable depth stop and spring action control of the head
WEN 4212 10-Inch Variable Speed Drill Press
- Spindle travel of 2-2/5 in. with easy to read, adjustable depth stop for accurate and repeatable drilling operations
- 8 in. x 7-2/3 in. cast iron worktable features rack and pinion height adjustment and bevels up to 45 degrees left and right
- Laser target your drilling operation marked with an X-pattern display
- Includes drill press, mechanical variable speed, 1/2 in. keyed chuck and key, laser, and tools for assembly
GOSWIFT 9inch Drill Press Locking Clamp, Drill Press Vice, Heavy Duty Drill Press Locking Clamp
- 【Function】Secure your workpiece with this heavy duty drill press locking clamp .
- 【Special Design】This locking clamp fastens directly to the drill press slot for quick, easy operation. The clamp features a 2 in. maximum jaw opening and a 3 in. throat depth to accommodate a variety of tasks.
- 【Usage】Fastens to drill press slot and ensures accuracy and safety .
- 【Preference】Great for woodworking professionals alike.
- 【Strength】Quick release lever makes for simple disengagement
Irwin Tools Drill Press Vise, 4″, 226340
- Slotted base for easy installation and positioning
- Textured jaws for secure gripping
- 4.5 Inch jaw capacity perfect for light duty tasks
- Lightweight and portable
- Crated of forged iron for long-lasting durability
HFS (R) Floor Drill Press Stand Table for Drill Workbench Repair Tool Clamp for Drilling Collet,drill Press Table
- [Professional Design]: This heavy-duty drill stand is specially designed for electric drills with a diameter of 38mm to 43mm (1.48 inches to 1.7 inches). With this drill stand, it is possible to drill holes on surfaces, round workpieces and plates with absolute precision.
- [Bottom Bracket]: It has a sturdy column, a slot for installing a vise on the base, and 4 clamping points for firmly fixing on the workbench, a depth adjustment scale, and an adjustable scale ring. Set the drilling depth precisely until the last millimeter.
- [Precautions for use]: In order to prevent the tip of the drill bit from escaping, dent it with a central nail etc. where it hangs on the hole. If the drill is not firmly fixed, the drill may float during lifting. If the restraining base and material are on your hands, it will cause serious injury on the blade, so please take off your military hands before starting work.
- [Product specifications]: (product size) 40 cm high × 15.5 cm wide × 15.5 cm thick ●”Adjustable angle” 0°~90°, use this drill holder to open the oblique hole ●”Material” aluminum die-casting. ● “Sliding type” up and down sliding type. The base is equipped with 4 screws. Maximum working stroke: 60mm
- [Note]: If you want to open a hole with a hand-held electric drill, then if you want to open a vertical hole, even if it is not lost to the force of a hand bump or an electric tool, it is easy to brush into the straight hole. Although the material is made of wood, because the wood has hard parts, the refill may escape depending on the condition of the wood. If it is the lower hole of the screw, although there is no problem, it may not be able to open the vertical hole depending on the product.
WEN 4214 12-Inch Variable Speed Drill Press,Orange & DPA2412T 24 in. x 12 in. Drill Press Table with an Adjustable Fence and Stop Block
- Product 1: Infinitely variable speed ranges from 580-3200 RPMS. Mechanical variable speed delivers equal torque throughout the range. LED read out displays speed.
- Product 1: Spindle Travel of 3-1/8″ with easy to read, locking linear depth stop for accurate and repeatable drilling operations. Front to the back of the motor is 22 inches
- Product 1: Quill diameter of 2.17 inches. Durable 2/3hp induction motor develops ample torque and power. Motor: 120 V, 60 Hz. Laser Module: Class III
- Product 1: 9-1/2 x 9-1/2″ cast iron worktable features rack & pinion height adjustment and bevels up to 45 Degree left & right. Width with the handles: 14-1/2″
- Product 2: Expand your workspace by 275 square inches (23-7/8 inch width, 11-7/8 inch depth)
- Product 2: Spacious table measures in at 23-7/8 x 11-7/8 x 1 inches
- Product 2: Fits any drill press table between 5 and 16 inches in width
- Product 2: Designed to fit the entire WEN Drill Press Series
Hardware Factory Store 2 Way 4-Inch Drill Press X-Y Compound Vise Cross Slide Mill
- Durable cast iron construction, Powerful serrated steel jaws
- 4 Inch Wide Jaw, Cold rolled steel screws
- 2 swivel crank handles for adjusting vise front to back and left to right, Bolt down slots for securing
- Hinged vise crank handles drops out of the way, Designed for woodworking and metalworking
- 3.5 Inch throat opening, 5 Inch longitudinal and 4.5 inch cross travel
WEN 414CV 4.25″ Compound Cross Slide Industrial Strength Benchtop & Drill Press Vise
- 4.25 by 1.25 inch jaws open up to 4.125 inches wide
- Constructed of industrial-strength powder-coated cast iron
- Hand wheels feature machine-marked 0.1 mm increments for maximum precision
- Jaws travel 5.8 inches left and right and 6 inches front and back
- Universal design compatible with the majority of drill presses on the market (see images for base dimensions)
As an Amazon Associate I earn from qualifying purchases.