Technical Pro PX3000 Professional 2-Channel 3000 Watt Power Amplifier

Technical Pro PX3000 Professional 2-Channel 3000 Watt Power Amplifier

    Features:

  • 3000 Watt Power Amplifier
  • LED Meters
  • Integrated Cooling Fan

Technical Pro Torque Audio AW1 1000 Watt 2-Channel DJ Power Amplifier/Amp

Technical Pro Torque Audio AW1 1000 Watt 2-Channel DJ Power Amplifier/Amp

    Features:

  • 1000 watts peak power
  • 450 watts @ 2 ohms
  • Outputs: Banana binding post
  • Power, Level & Clipping indicators per channel
  • N/A

MUSYSIC Professional 2 Channel 8500 Watts D-Class 1U Power Amplifier MU-D8500

MUSYSIC Professional 2 Channel 8500 Watts D-Class 1U Power Amplifier MU-D8500

    Features:

  • Stereo Output Power: “2x4800W PEAK, 2x2400W Program, 2x1200W RMS @ 2Ω” “2x2400W PEAK, 2x1200W Program, 2x600W RMS @ 4Ω” “2x1200W PEAK, 2x600W Program, 2x300W RMS @ 8Ω”
  • Bridge Output Power: “4800W PEAK, 2400W Program, 1200W RMS @ 4Ω” “2400W PEAK, 1200W Program, 600W RMS @ 8Ω”
  • Frequency Response: 20Hz-20KHz,+0,-1dB at watts / THD+N(20Hz-20KHz) <0.23%20Hz-20KHz / Siew Rate >30V/us / Damping Factor >150 / Output Circuitry Class AB / Signai to Noise Ratio ≥96dB / Cross Talk >80dB / lnput Sensitivity(8Ω) 1V / input lmpedance 20 k Ω baiance / 10 k Ω unbalanced unbalance balancing 20 k / 20 k /
  • Dual cooling fans / Connectors Input: XLR input, 1/4″ input: Speakon connector Output: Speakon, locking type socket, Banana plug connection output, Power Requirements: 115v 50/60 hz
  • Controls Panel: the power switch, channel 1 and channel 2 channel gain control; After the board: working mode, pressure limit./ lndicators Panel: the power switch, channel 1 and channel 2 channel gain control; After the board: working mode, pressure limit./ Amplifier Protection With short circuit, overload, overheat, cut peak pressure limit, dc, soft start, relay zero current switch, super audio and radio frequency protection device.

Alpine R-A90S R-Series 6/5/4/3 Channel Power Amplifier with Staggered Power

Alpine R-A90S R-Series 6/5/4/3 Channel Power Amplifier with Staggered Power

    Features:

  • 6-channel car amplifier, 75 watts RMS x 4 + 150 watts RMS x 2 at 4 ohms, 100 watts RMS x 4 + 250 watts RMS x 2 at 2 ohms, 200 watts RMS x 2 bridged at 4 ohms + 500 watts RMS x 1 bridged at 4 ohms
  • GTO (Great Turn On) signal-sensing turn-on with Ch1/2 speaker-level input
  • 4-gauge power and ground leads recommended — wiring and hardware not included with amplifier
  • Staggered power amplifiers are perfect for a 3-way front-stage setup,and work great for a front/rear/sub stereo as well.

Behringer Power Amplifier (NX6000)

Behringer Power Amplifier (NX6000)

    Features:

  • Delivers 2 x 3000 watts into 4 ohms; 2 x 1600 watts into 8 ohms and weighs less than 13 lbs/ 5.9 kg
  • Ultimate reliability through revolutionary cool-running high-density Class-D technology with “near-zero” Thermal buildup
  • Ultra-efficient switch-mode power supply for noise-free audio, superior transient response and low power consumption
  • Built-in stereo crossover with low-cut, high-cut and full range Mode
  • Smartsense loudspeaker Impedance compensation features fully Linear frequency response at any speaker load Impedance

Professional Audio Bluetooth Power Amplifier – 2-Channel Rack Mount Bridgeable, LED Indicators, Shockproof Binding Posts, Cooling Fans 1000 Watt – Pyle PTA1000

Professional Audio Bluetooth Power Amplifier - 2-Channel Rack Mount Bridgeable, LED Indicators, Shockproof Binding Posts, Cooling Fans 1000 Watt - Pyle PTA1000

    Features:

  • BLUETOOTH COMPATIBLE: Built-in Bluetooth wireless music streaming ability works with all of today’s latest devices including smartphones, tablets, laptops and computers. Hassle-free receiver pairing allow you to stream wireless audio instantly
  • SAFETY CONSCIOUS POWER SWITCH: When the power amp is turned on, there is a three-second delay, which reduces/eliminates the turn-on transients associated with the system equipment connected to the amplifier and protects loudspeakers
  • POWER LED: Built-in power LED indicators illuminate when the AC main power is being supplied to the amp and both channels are operational
  • SHOCKPROOF BINDING POSTS: Shockproof binding posts are provided. For each channel, the outputs are in parallel and the speaker connection cables can be terminated with banana plugs or stripped wires
  • AUTOMATIC COOLING FANS: Two 2-speed DC fans supply cool air to the amplifier. The fans switch to high speed automatically when the unit requires additional cooling

Yamaha PX3 Dual Channel 2x500W Lightweight Power Amplifier w/ DSP

Yamaha PX3 Dual Channel 2x500W Lightweight Power Amplifier w/ DSP

    Features:

  • 50% lighter than previous Yamaha P Series Power Amplifiers
  • Onboard Signal Processing including D-Contour
  • Features include; Config Wizard, Panel Lock, Event Logging
  • 2x 500W@4Ω

Rockville RPA16 10000 Watt Peak / 3000w RMS 2 Channel Power Amplifier Pro/DJ Amp

Rockville RPA16 10000 Watt Peak / 3000w RMS 2 Channel Power Amplifier Pro/DJ Amp

    Features:

  • Features of RPA16: Rockville RPA16 10, 000 Watt Peak 2 Channel Professional/DJ Rack Mount Amplifier, LCD displays volume in dB per channel and operating temperature, 2U rack space, Built in limiter protects your speakers from distortion and clipping, Bridged mode allows you to combine both channels power into one channel for use with a subwoofer, Stereo mode is perfect for (2) speakers or (4) speakers in a left and right configuration.
  • Parallel mode gives you dual mono output signal which is perfect for monitor use when you want all sounds coming out of each speaker instead of a left/right configuration, Built in crossover switch (bypass, 80 Hz, 160 Hz) allows amp to be used with full range PA speakers, or Subwoofer(s), Channel A & B Clipping Led Indicators, Channel A & B Separate Level Controls, Power, signal, clipping, and protection LED indicators on front of amp, Heavy duty rack mount ears with handles.
  • Built-in variable high velocity quiet cooling fans, Maximum headroom for 4-ohm and 8-ohm Speakers, Level controls for precise setting and matching of sensitivity, Computer controlled IC protection circuitry against speaker short circuit, thermal over load, DC over load, User serviceable fuse (25A, 250V), Frequency Response (bandwidth @ 2Vrms out, @ -3. 0dB) 10 Hz – 30 Khz, THD + Noise @ 1Khz full power: <0. 04%, Input Impedance: 10K Ohm Balanced, Input signal voltage: 660mV – 1. 5V.
  • Input sensitivity: 0. 7v, Damping factor: ( 100Hz, 10w, 4 ohms): 36. 5, Damping factor: (1Khz @ 8 ohm): >400: 1, Effective damping factor (100Hz, 10w, 4 Ohms) 1. 08, Output impedance at speaker terminals: 0. 10975 Ohms, Frequency Response vs THD+N (worst case, across normal bandwidth 1W) 0. 6%, Signal to Noise Ratio: > 100dB, IMD 60Hz & 1kHz, 4: 1: <0. 04%, SLEW RATE (input filter limited) : 40v/uS, Power Requirements: 120V / 50-60Hz, Weight: 40. 8 lbs, Dimensions: 19. 09 x 16. 93 x 3. 35 inch.
  • Power Ratings of RPA16: RMS Power Output: Stereo 8 Ohm: 2 x 1000W, Stereo 4 Ohm: 2 x 1500W, Bridged 8 Ohm: 1 x 3000W. Peak Power Output: Stereo 4 Ohm: 2 x 5000W Max, Bridged 8 Ohm: 1 x 10000W Max.

Rockville RPA5 1000w Peak / 400w RMS (200 x 2) 2 Channel Power Amplifier Pro/DJ Amp

Rockville RPA5 1000w Peak / 400w RMS (200 x 2) 2 Channel Power Amplifier Pro/DJ Amp

    Features:

  • Rockville RPA5 400w RMS (200 x 2) 2 Channel Professional/DJ Rack Mount Amplifier. 2U rack space.
  • Bridged and Stereo output switch makes this perfect for (2) subwoofer, (2) speakers, or (4) speakers.
  • Built in crossover switch allows make this perfect for speakers, monitors, or subwoofers. Channel A & B Clipping Led Indicators.
  • Channel A & B Separate Level Controls. Power, signal, overload, clipping, and protection LED indicators on front of amp.
  • Heavy duty rack mount ears with handles. Built-in dual high velocity quiet cooling fans.
  • Maximum headroom for 4-ohm and 8-ohm Speakers. Level controls for precise setting and matching of sensitivity.
  • Computer controlled IC protection circuitry against speaker short circuit, thermal over load, DC over load.
  • User serviceable fuse (4A, 250V). Frequency Response: 20Hz to 20KHz <+/- 0.5dB. Distortion: <0.03%.
  • Input Impedance: 20K Ohm Balanced and 10K Ohm Unbalanced. Signal to Noise Ratio: > 102dB.
  • Power Requirements: 120V / 50-60Hz. Weight: 13.4 lbs. Dimensions: 18.97″ x 11.02″ x 3.54″.

Crown XLi800 Two-channel, 300-Watt at 4Ω Power Amplifier

Crown XLi800 Two-channel, 300-Watt at 4Ω Power Amplifier

    Features:

  • Stereo/parallel/bridge-mono mode
  • User selectable input sensitivity – 0. 775V and 1. 4V
  • Electronically balanced RCA & XLR inputs; binding post and Speak on outputs
  • Efficient forced-air cooling prevents excessive thermal buildup

As an Amazon Associate I earn from qualifying purchases.

Random products:

computer recording interfaces
chest expanders