10PCs Solder Wick Remover Desoldering Sucker Cable Desoldering Wick Soldering Accessory Low Residue No‑Cleaning 1.5/2.0/2.5/3.0/3.5mm for Cleaning Solder
- 【Good Soldering Performance】– Used to absorb excess solder with strong resistance to oxidation and corrosion, which has good thermal conductivity and soldering performance
- 【No Short Circuit Between Pins】– The welding on the lead can be sucked away to guarantee that there is no short circuit between the pins
- 【Increase Reballing Success Rate】– Using a soldering wire to clean the pads when reballing for BGA components can greatly increase the success rate
- 【High Class Copper Material】– Made of high class copper material with good quality, durable for a long service life
- 【Adopt Advanced Technology】– The product using advanced technology with excellent craftsmanship to bring smooth surface
63-37 Tin Lead Rosin Core Solder Wire for Electrical Soldering (0.8mm 100g)，2pcs Solder Wick No-Clean Solder Braid Wick Desoldering Wick（2.5cm Width, 1.5m Length），2pcs Soldering Sponge
- 【63-37 Tin Lead Rosin Core Solder Wire】High Quality Rosin Core Solder Wire: Tin 63%- Lead 37%，Flux content 2%，electrical soldering wire dia is 0.8mm，gross weight 100g，Low Melting Point: 361F/183C. easy to be soldered，flows smoothly，soldering fast and strong soldering point.
- 【Desoldering Wick】2pcs Solder Wick No-Clean Solder Braid Wick 2.5cm Width and 1.5m Length, made of pure oxygen-free copper wire, it has strong ability to absorb tin. No cleaning, low residue. Removes more solder than traditional wicks, making it easy to correct errors on small PCB boards.
- 【Soldering Sponge】2pcs Soldering sponge for use with soldering iron stands, can also be used with temperature controlled soldering iron system. Once immersed in the water, it will expand, without sulfur.
- 【Perfect Applications 】Very good soldering capability, esp for circuit board, DIY, home improvement, Repairation of cable/TV/Radio/sterro/ Toys and other electrical devices etc.
- 【Quality Assurance】Full refund guaranteed within 30days if you are not satisfied with the quality.
IZOKEE Solder Wire Rosin Core 100g 0.6mm with No-Clean Desoldering Wick 1.5mm Solder Wick for Electrical Soldering
- 【Cost-effective choice】The product contains 0.6mm 100g Rosin Core Soldering Tin Wire and a roll of 1.5mm Desoldering Solder Wick. Purchase materials needed for welding and desoldering materials in one go!
- 【High Quality Solder Wire】The solder joints of the tin wire are bright and full.There will be no virtual soldering, false soldering or poor contact. High insulation resistance. Less residue after welding and strong oxidation resistance. After welding, a protective film will be formed on the surface of the solder joint to reduce the oxidation of the solder joint, keep the solder joint bright and high conductivity.
- 【Low Melting Point】Corrosion is small. Welding speed is fast, while reducing welding time, it can also reduce thermal shock to components.
- 【Desoldering Wick】High thermal conductivity. It can remove the wrong solder joints and re-weld, so as to absorb excess solder and clean up the residue.
- 【Wide Applications】Suitable for Electronic products, such as circuit board, DIY, home improvement, Repairation of cable/TV/Radio/sterro/ Toys and other electrical devices etc.
Soldering Iron Kit Electronics 60W Adjustable Temperature Soldering Iron, 5pcs Soldering Iron Tips, Solder, Rosin, Solder Wick, Stand and Other Soldering Kits in Portable Toolbox
- 【20-IN-1 SOLDERING IRON KIT】: This package comes with soldering iron, solder wire, desoldering pump, solder wick, stand with cleaning sponge, 5 multiple soldering tips, 2 anti-static tweezers, rosin (solder paste), copper wire, scissors, screwdrivers, insulation tape, knife and a hard carry case to meet all your soldering project needs. Particularly suitable for WELDING BEGINNER / WELDING CLASSRROM / BASIC HOUSEHOLD TOOLBOX / TRAINING FOR SOLDER TECHNICIAN…
- 【HEAT UP QUICKLY & ENERGY SAVING】: The 110V 60W soldering iron features an advanced ceramic printed heater to heat up to the targeted temperature quickly, and adjustable temperature with thermostat range 200~450℃, with large 4 venting holes make it much more energy-efficient.
- 【UPGRATED ONE-HANDED USE DESOLDERING PUMP】: The Solder sucker with simple construction, you can cock it and press the trigger button with one hand. High pressure vacuum can remove solder from a printed circuit board effectively. The body of desoldering pump is made of aluminum, which can resistance to beat, corrosion and have good heat dispersion. Best for removing solder from PCB through hole solder joints.
- 【PORTABLE STORAGE TOOLBOX】: The multifunctional durable plastic case is rather convenient to store small tools and easy to carry, avoiding damage of the soldering gun and all accessories with inner protective layer.
- 【APPLICATION & WARRANTY】: With this multifunctional tool kit, you can repairing various electronics and circuit board, like welding, jewelry, guitar, watches, wiring, mobile device, computers hardware, small electronic work, TV capacitors or accessories, trinkets of children, crafts and more. TABIGER promises a 12 months product warranty and free lifetime customer support. Please contact us if you have any problems.
Soldering Iron Tip Cleaner, 60/40 Solder Wire Fine 0.6 mm Tin Lead Rosin Core, Desoldering Sucker, 2 No-Clean Solder Wick (2.5 mm Width, 1.5 m Length) for Welding Soldering Metalworking
- Welding accessories kit: you will get 5 products, including soldering iron tip cleaner, 60/40 solder wire fine 0.6 mm tin lead rosin core, desoldering sucker and 2 pieces solder braid wick (2.5 mm width, 1.5 m length) with flux, nice combination to meet your daily welding needs, and make your welding more convenient
- Desoldering wick with copper braid: 2 pieces of solder braids with the size of 2.5 mm wide, 1.5 m long have geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick; Once the desoldering wick and the solder has been heated, the solder braid can quickly absorb molten solder and leave a clean working area
- ABS body with non-slip sponge and nylon nozzle desoldering pump: the body of the desoldering vacuum pump is made of quality ABS, which makes the solder sucker delicate and durable; Also, the covered sponge can absorb sweat and heat, making it comfortable to hold, the nylon nozzle of the solder suck can endure high temperatures, thus it can be applied for a long time
- Nice solder iron tip cleaner: sturdy metal container; The sponge contains brass coils, so it is soft yet hard; It won’t damage your soldering tips; To clean the tip, you need to stab the iron into the holder, an alternative for wet sponge; You don’t need any water, so there will be no oxidation, and tips temperature won’t be reduced; Avoid soldering iron cooling, improve welding efficiency; Without lead or smoke, pollution or toxic substance
- Useful solder rosin wire core tin: the 60/40 tin lead solder wire with rosin is made of pure tin, with good activity, nice welding performance and fast tinning; Fresh smell, less smoke, non-toxic gases, less splashing during welding; Also, solder joints are bright and firm to provide a protective film on the surface of the solder joint after soldering, reducing solder joints oxidation reaction; Low melting point and high insulation resistance can reduce welding time and improve efficiency
Bastex Desoldering Wick and Pump Vacuum Solder Removal Tool & Solder Braid (2.5mm Width, 1.5m Length)
- GENERAL USAGE: Bastex Solder sucker is a long aluminum plunger that allows you to suck the access melted solder away from the circuit board by creating strong suction to help clean spare solder on the pin. Especially helps in small, hard to reach areas. Best for through-hole connections. The Soldering wick braid helps clean spare solder on the pin away to prevent short circuits.
- PRODUCT FEATURES: Easy to use. Solder sucker features powerful, spring-loaded vacuum plunger for complete solder removal. Can be used by either the left or right hand giving you versatility for any soldering job. Soldering braid includes one and a half meters of length to absorb during your soldering jobs.
- DURABILITY: The Solder vacuum is a solid construction with a plastic backing to ensure stability.. Soldering wick is made from pure oxygen free copper wire, no clean flux.
- CONTENTS: One- solder sucker vacuum One-soldering wick braid Width 2.5 mm Length 1.5 mm
- WARRANTY: This product carries a 30-day money back warranty and a 12-month replacement warranty. Satisfaction guaranteed.
Zemoner 0.1mm Solder Wire Flux Rosin Core 100g with 2.5mm Solder Wicks No-Clean Solder Braided Wick for Electrical Soldering
- ▶ Welding and Desoldering ◀ The Package includes 1mm 100g Rosin Solder Wire with 2.5mm Solder Wicks. The desoldering wicks provides a easier way to correct mistakes on PCB boards and will not make damage. The tin wire materials needed for welding can be purchased at an affordable price at one time. No additional purchase!
- ▶ Solder Wire ◀ Solder Wire is made of tin-copper alloy and Flux. The content of Flux is 2%-2.5%. This makes Solder Wire easier to use.
- ▶ Low Melting Point ◀ The melting point of tin wire is very low and can melt quickly. Therefore, the welding speed is relatively fast. Not produce false welding, resulting in poor contact.
- ▶ Easy to desoldering ◀ Made from oxygen free copper wire. Remove more solder than conventional wick. So it easy to correct mistakes on PCB boards.
- ▶ Wide of Applications ◀ The solder wire is designed for electrical repairs, such as headset / radio / audio / TV / Toys / circuit board / Remotes and other electrical devices.
NTE Electronics SW02-10 No-Clean Solder Wick, 4 Blue.098″ Width, 10′ Length
- Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes
- Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board
- 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder
- Available with standard or anti-static bobbins
Professional welding tools and desoldering tool sets (12 pieces), desoldering pumps, desoldering wicks, wire cutters, tweezers, welding wire, soldering iron auxiliary accessories
- Tool Kit：Suitable for electronic repair and DIY, any circuit board with small parts, such as mobile phone motherboards, cables, TVs, VCRs, radios, headphones, stereos, motors, toys and other electronic equipment. Correct the error of the small board on the PCB.
- Tool Kit：includes 6 welding aids and desoldering pump, desoldering core, Wire cutters, anti-static ESD tweezers, 0.8mm solder wire
- Welding auxiliary tools: widely used in electronic repair, soldering, desoldering, etc. Can use cutting, scraping, hooks, brushes and other welding work requirements. Cutting pliers: Made of high-quality steel, it can accurately cut flexible cords within 1mm. Anti-static ESD tweezers: Made of high-quality stainless steel, anti-static, non-sticky.
- Desoldering pump: very sturdy, can remove excess solder on the circuit board, easy to operate with one hand, desoldering core:width 2.5mm / 0.098 in,length 1.5m / 59 in length, made of pure oxygen-free copper It has a strong ability to absorb tin. No cleaning is required and less residue. Solder wire: 0.35 ounces / 10 g
- Tool Kit: Contains 12 necessary welding tools to save you multiple purchases.
Relife Low Residue Desoldering Wick Braid come with Thumb-wheel Dispenser, No-Clean Solder Remover Wick Cord For Mobile Phone BGA PCB Repair Tool
- Solder Removal Tool: 1pcs desoldering solder wick, a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder
- Desoldering Solder Wick Braid: Solder braid with the size 3.0mm Width, 2.0m Length, this desoldering wick with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area
- Hight quality Shell: The body of the desoldering pen shell is made of high quality ABS, which make the solder sucker delicate and durable, make it comfortable to hold, thus it can be used for a long time
- Weaving Design: Efficiently absorb excess solder when removing tinan solder holes, Adsorption tin paste clean, low residue, suitable for precision circuit board use, reduces the risk of damage to the motherboard
- Widely Used of Solder Wick: The desoldering solder wick can be used to correct mistakes on PCB board, remove components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on SMD components and more
As an Amazon Associate I earn from qualifying purchases.